Inner Volume Instrument
*An instrument designed specifically for Quality control to accurately measure the inner volume of condensers in the refrigeration industry
* performs leakage tests to sort out the components that do not comply with the specified inner volume standard and determine its Error percentage
* the device is fully automatic
Test and Calibration Benches
- The benches are custom made to provide testing facilities as to the customers specs
- The benches have pneumatic and electronic capabilities in separate sections
- The benches can be provided with high accuracy equipment for pressure and temperature calibration
Environmental Test Rooms
In our environmental test rooms Home appliances testing is performed (refrigerators ,heaters, washing machines ,air conditioners )
The tests are performed in very stressful conditions of temperature and relative humidity which can be set in the range from 0-55C for temperatrure, and relative humidity to comply with the test standards conditions (ISO,IEC , Etc) and all the international test standards.
Data Logging Systems
* Data acquisition systems for collection and storing data from the field
* Providing all the necessary sensors for measurements and collecting the sensor data and sending them via Data acquisition Systems for storing, printing, data analysis
* the Data acquisition Systems can be custom made to the customers needs in terms of the types of measurements needed and the no of points
Safety Valve Testers
Used to test and tune saftey valves or compennets used in hifgh pressure systems
The system generates pressure up yto 450 Bars or more using an air source of 10 Bars
The units under test are connected to the tester using a hydraulic suspension system
PortableMeasurment & Calibration
* Portable low cost calibrators for calibrating temperature and pressure with high accuracy and easy to use
* the instruments operation and programming is done from the front panel with no need for any additional software or hardware
Themrostat Tester
* tests a large number of thermostats to determine the errors in their operation and generates a Pass/Fail report to prevent unsuitable units from going into the production line
* can test units starting from 32 , 64 and their multiples at the same time
* comes with a temperature digital with Accuracy 0.01 C
* testing time 30 Minutes Approx.
* Fully automatic operation
Industrial Control Systems
Our industrial control systems are used to control the operation of any industrial process such as temperature control , speed control , Cascaded control Etc.
Capillary Tube & Nozzle Gas Mass Flow Meter
Range: 0-5 SLPM (Standard Liter per minute) , 0-10 SLPM (other ranges available upon request) Test Pressure: 0-10 psi , 0-75 psi , 0-150 psi The mass flow rate is the volumetric flow rate corrected to a standard temperature and pressure (typically 14.696 psi Abs and 25C)
The unit measures:
• Test pressure Absolute
• Back pressure at test point gauge or absolute
• Gas temperature
• Volumetric flow,
• Mass flow
Options:
Computer interface & operation software
Accuracy: 0.8 % of reading
Test Gas: air or nitrogen (other gases available upon request)
Operating Voltage: 220 VAC , 50 Hz
Supply pressure : 15 Bar Max.
Max. working pressure : 10 Bar
Weighing Systems & Programmable Digital Indicators
- Programmable Digital Indicators
- Digital Weighing System
Pressure Calibration System
* Ranges up to 1000 Bar and more.
* Works on normal water.
* Very stable output pressure.
* Not affected by limited leakage in the outlet.
a special system can be supplied to magnify compressed air in 10 Bar operating pressure to achieve 1000 Bar.